EE445M RTOS
Taken at the University of Texas Spring 2015
Main Page
Related Pages
Modules
Data Structures
Files
File List
Globals
hw_memmap.h
Go to the documentation of this file.
1
//*****************************************************************************
2
//
3
// hw_memmap.h - Macros defining the memory map of the device.
4
//
5
// Copyright (c) 2005-2014 Texas Instruments Incorporated. All rights reserved.
6
// Software License Agreement
7
//
8
// Redistribution and use in source and binary forms, with or without
9
// modification, are permitted provided that the following conditions
10
// are met:
11
//
12
// Redistributions of source code must retain the above copyright
13
// notice, this list of conditions and the following disclaimer.
14
//
15
// Redistributions in binary form must reproduce the above copyright
16
// notice, this list of conditions and the following disclaimer in the
17
// documentation and/or other materials provided with the
18
// distribution.
19
//
20
// Neither the name of Texas Instruments Incorporated nor the names of
21
// its contributors may be used to endorse or promote products derived
22
// from this software without specific prior written permission.
23
//
24
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
25
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
26
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
27
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
28
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
29
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
30
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
31
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
32
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
34
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35
//
36
// This is part of revision 2.1.0.12573 of the Tiva Firmware Development Package.
37
//
38
//*****************************************************************************
39
40
#ifndef __HW_MEMMAP_H__
41
#define __HW_MEMMAP_H__
42
43
//*****************************************************************************
44
//
45
// The following are defines for the base address of the memories and
46
// peripherals.
47
//
48
//*****************************************************************************
49
#define FLASH_BASE 0x00000000 // FLASH memory
50
#define SRAM_BASE 0x20000000 // SRAM memory
51
#define WATCHDOG0_BASE 0x40000000 // Watchdog0
52
#define WATCHDOG1_BASE 0x40001000 // Watchdog1
53
#define GPIO_PORTA_BASE 0x40004000 // GPIO Port A
54
#define GPIO_PORTB_BASE 0x40005000 // GPIO Port B
55
#define GPIO_PORTC_BASE 0x40006000 // GPIO Port C
56
#define GPIO_PORTD_BASE 0x40007000 // GPIO Port D
57
#define SSI0_BASE 0x40008000 // SSI0
58
#define SSI1_BASE 0x40009000 // SSI1
59
#define SSI2_BASE 0x4000A000 // SSI2
60
#define SSI3_BASE 0x4000B000 // SSI3
61
#define UART0_BASE 0x4000C000 // UART0
62
#define UART1_BASE 0x4000D000 // UART1
63
#define UART2_BASE 0x4000E000 // UART2
64
#define UART3_BASE 0x4000F000 // UART3
65
#define UART4_BASE 0x40010000 // UART4
66
#define UART5_BASE 0x40011000 // UART5
67
#define UART6_BASE 0x40012000 // UART6
68
#define UART7_BASE 0x40013000 // UART7
69
#define I2C0_BASE 0x40020000 // I2C0
70
#define I2C1_BASE 0x40021000 // I2C1
71
#define I2C2_BASE 0x40022000 // I2C2
72
#define I2C3_BASE 0x40023000 // I2C3
73
#define GPIO_PORTE_BASE 0x40024000 // GPIO Port E
74
#define GPIO_PORTF_BASE 0x40025000 // GPIO Port F
75
#define GPIO_PORTG_BASE 0x40026000 // GPIO Port G
76
#define GPIO_PORTH_BASE 0x40027000 // GPIO Port H
77
#define PWM0_BASE 0x40028000 // Pulse Width Modulator (PWM)
78
#define PWM1_BASE 0x40029000 // Pulse Width Modulator (PWM)
79
#define QEI0_BASE 0x4002C000 // QEI0
80
#define QEI1_BASE 0x4002D000 // QEI1
81
#define TIMER0_BASE 0x40030000 // Timer0
82
#define TIMER1_BASE 0x40031000 // Timer1
83
#define TIMER2_BASE 0x40032000 // Timer2
84
#define TIMER3_BASE 0x40033000 // Timer3
85
#define TIMER4_BASE 0x40034000 // Timer4
86
#define TIMER5_BASE 0x40035000 // Timer5
87
#define WTIMER0_BASE 0x40036000 // Wide Timer0
88
#define WTIMER1_BASE 0x40037000 // Wide Timer1
89
#define ADC0_BASE 0x40038000 // ADC0
90
#define ADC1_BASE 0x40039000 // ADC1
91
#define COMP_BASE 0x4003C000 // Analog comparators
92
#define GPIO_PORTJ_BASE 0x4003D000 // GPIO Port J
93
#define CAN0_BASE 0x40040000 // CAN0
94
#define CAN1_BASE 0x40041000 // CAN1
95
#define WTIMER2_BASE 0x4004C000 // Wide Timer2
96
#define WTIMER3_BASE 0x4004D000 // Wide Timer3
97
#define WTIMER4_BASE 0x4004E000 // Wide Timer4
98
#define WTIMER5_BASE 0x4004F000 // Wide Timer5
99
#define USB0_BASE 0x40050000 // USB 0 Controller
100
#define GPIO_PORTA_AHB_BASE 0x40058000 // GPIO Port A (high speed)
101
#define GPIO_PORTB_AHB_BASE 0x40059000 // GPIO Port B (high speed)
102
#define GPIO_PORTC_AHB_BASE 0x4005A000 // GPIO Port C (high speed)
103
#define GPIO_PORTD_AHB_BASE 0x4005B000 // GPIO Port D (high speed)
104
#define GPIO_PORTE_AHB_BASE 0x4005C000 // GPIO Port E (high speed)
105
#define GPIO_PORTF_AHB_BASE 0x4005D000 // GPIO Port F (high speed)
106
#define GPIO_PORTG_AHB_BASE 0x4005E000 // GPIO Port G (high speed)
107
#define GPIO_PORTH_AHB_BASE 0x4005F000 // GPIO Port H (high speed)
108
#define GPIO_PORTJ_AHB_BASE 0x40060000 // GPIO Port J (high speed)
109
#define GPIO_PORTK_BASE 0x40061000 // GPIO Port K
110
#define GPIO_PORTL_BASE 0x40062000 // GPIO Port L
111
#define GPIO_PORTM_BASE 0x40063000 // GPIO Port M
112
#define GPIO_PORTN_BASE 0x40064000 // GPIO Port N
113
#define GPIO_PORTP_BASE 0x40065000 // GPIO Port P
114
#define GPIO_PORTQ_BASE 0x40066000 // GPIO Port Q
115
#define GPIO_PORTR_BASE 0x40067000 // General-Purpose Input/Outputs
116
// (GPIOs)
117
#define GPIO_PORTS_BASE 0x40068000 // General-Purpose Input/Outputs
118
// (GPIOs)
119
#define GPIO_PORTT_BASE 0x40069000 // General-Purpose Input/Outputs
120
// (GPIOs)
121
#define EEPROM_BASE 0x400AF000 // EEPROM memory
122
#define ONEWIRE0_BASE 0x400B6000 // 1-Wire Master Module
123
#define I2C8_BASE 0x400B8000 // I2C8
124
#define I2C9_BASE 0x400B9000 // I2C9
125
#define I2C4_BASE 0x400C0000 // I2C4
126
#define I2C5_BASE 0x400C1000 // I2C5
127
#define I2C6_BASE 0x400C2000 // I2C6
128
#define I2C7_BASE 0x400C3000 // I2C7
129
#define EPI0_BASE 0x400D0000 // EPI0
130
#define TIMER6_BASE 0x400E0000 // General-Purpose Timers
131
#define TIMER7_BASE 0x400E1000 // General-Purpose Timers
132
#define EMAC0_BASE 0x400EC000 // Ethernet Controller
133
#define SYSEXC_BASE 0x400F9000 // System Exception Module
134
#define HIB_BASE 0x400FC000 // Hibernation Module
135
#define FLASH_CTRL_BASE 0x400FD000 // FLASH Controller
136
#define SYSCTL_BASE 0x400FE000 // System Control
137
#define UDMA_BASE 0x400FF000 // uDMA Controller
138
#define CCM0_BASE 0x44030000 // Cyclical Redundancy Check (CRC)
139
#define SHAMD5_BASE 0x44034000 // SHA/MD5 Accelerator
140
#define AES_BASE 0x44036000 // Advance Encryption
141
// Hardware-Accelerated Module
142
#define DES_BASE 0x44038000 // Data Encryption Standard
143
// Accelerator (DES)
144
#define LCD0_BASE 0x44050000 // LCD Controller
145
#define ITM_BASE 0xE0000000 // Instrumentation Trace Macrocell
146
#define DWT_BASE 0xE0001000 // Data Watchpoint and Trace
147
#define FPB_BASE 0xE0002000 // FLASH Patch and Breakpoint
148
#define NVIC_BASE 0xE000E000 // Nested Vectored Interrupt Ctrl
149
#define TPIU_BASE 0xE0040000 // Trace Port Interface Unit
150
151
#endif // __HW_MEMMAP_H__
inc
hw_memmap.h
Generated on Fri Mar 13 2015 21:18:37 for EE445M RTOS by
1.8.9.1
1.8.9.1 
