EE445M RTOS
Taken at the University of Texas Spring 2015
Data Fields
tCANBitClkParms Struct Reference
Can_api

#include <can.h>

Collaboration diagram for tCANBitClkParms:
Collaboration graph

Data Fields

uint32_t ui32SyncPropPhase1Seg
 
uint32_t ui32Phase2Seg
 
uint32_t ui32SJW
 
uint32_t ui32QuantumPrescaler
 

Detailed Description

This structure is used for encapsulating the values associated with setting up the bit timing for a CAN controller. The structure is used when calling the CANGetBitTiming and CANSetBitTiming functions.

Definition at line 187 of file can.h.

Field Documentation

uint32_t tCANBitClkParms::ui32Phase2Seg

This value holds the Phase Buffer 2 segment in time quanta. The valid values for this setting range from 1 to 8.

Definition at line 200 of file can.h.

Referenced by CANBitTimingGet(), and CANBitTimingSet().

uint32_t tCANBitClkParms::ui32QuantumPrescaler

This value holds the CAN_CLK divider used to determine time quanta. The valid values for this setting range from 1 to 1023.

Definition at line 212 of file can.h.

Referenced by CANBitTimingGet(), and CANBitTimingSet().

uint32_t tCANBitClkParms::ui32SJW

This value holds the Resynchronization Jump Width in time quanta. The valid values for this setting range from 1 to 4.

Definition at line 206 of file can.h.

Referenced by CANBitTimingGet(), and CANBitTimingSet().

uint32_t tCANBitClkParms::ui32SyncPropPhase1Seg

This value holds the sum of the Synchronization, Propagation, and Phase Buffer 1 segments, measured in time quanta. The valid values for this setting range from 2 to 16.

Definition at line 194 of file can.h.

Referenced by CANBitTimingGet(), and CANBitTimingSet().

The documentation for this struct was generated from the following file: